| |
Violations within the past five years
|
| Violation ID |
Occurrence Date |
Violation Type |
Violation Description(-) |
Violation Status |
Priority |
Source |
Facility Name |
Violated Reg. Meas. ID |
Violated Reg. Meas. Order No. |
Linked to Enf. |
| S885432 |
07/16/2023 |
SW - Late Report |
Failure to submit 2022 - 2023 Annual Report by due date |
Violation |
N |
Report |
AMA Plastics |
S416254 |
2014-0057-DWQ |
Y |
| S883376 |
11/02/2022 |
SW - Deficient BMP Implementation |
I observed spilled plastic around the trash compactors, scale and mold buildup on the cooling tower louvers, rust and staining from towers and hazmat area, and an unlidded dumpster containing industrial waste. |
Violation |
N |
Inspection |
AMA Plastics |
S416254 |
2014-0057-DWQ |
Y |
| S882121 |
05/25/2022 |
SW - Deficient BMP Implementation |
? I observed plastic pellets, cardboard packaging, and what appeared to be leaked motor oil around the trash compactors (pages 4 and 5). Section X.H.1.c.ii requires, to the extent feasible, that spills and leaks of industrial materials be cleaned promptly and disposed of properly. ? I observed cardboard stored outside near the NW corner of the facility (page 8). Section X.H.1.a.v requires, to the extent feasible, all stored industrial materials be covered that can be readily mobilized by contact with stormwater. Cardboard is ?readily mobilized? since it breaks down when wet. ? I observed a curb drain (D-1) in need of maintenance (pages 10 and 11). Section X.H.2.a requires advanced BMPs be implemented and maintained. ? I observed cooling towers with mold, rust, and what looked like brine on and around the intake vents (pages 15 and 16). Section X.H.1.b requires, to the extent feasible, procedures for prompt preventive maintenance of equipment that may spill or leak pollutants. ? I observed evidence of leakage on the ground from the cooling towers and HazMat area extending towards the curb gutter near D-1 (pages 12, 14, and 15). Section X.H.1.c.ii requires, to the extent feasible, spilled or leaked industrial materials shall be cleaned promptly and disposed of properly. ? I observed organic debris, algae, and zip ties in and near the curb gutter along the SE side of the facility (pages 17-20). Section X.H.1.a.i requires, to the extent feasible, debris, waste, spills, tracked materials, or leaked materials shall be cleaned and disposed of properly. |
Violation |
N |
Inspection |
AMA Plastics |
S416254 |
2014-0057-DWQ |
Y |
| S882120 |
07/27/2022 |
SW - Deficient BMP Implementation |
I observed an open waste container containing purged material, spilled plastic around trash compactors, exposed outdoor storage of plastic, and cooling towers with lime and mold buildup on the intake vents. These findings are in violation of sections X.H.d.iii, XVIII.A.2.b.iii, XVIII.A.2.b.v, and XXI.F, respectively. |
Violation |
N |
Inspection |
AMA Plastics |
S416254 |
2014-0057-DWQ |
Y |
|
Report currently showing last five years of violations. Click here to return to viewing one year of violations. Refer to the Interactive Violation Report for more data.
|
|
|
Total Violations: 4
|
|
*Click the "(+/-) Violation Description" link to expand and contract the violation description.
|
|
|
